Active filters
High performance resin light and diffuser: unattainable by corrosion of atmospheric agents; colors stabilized by treatment U.V.. Thermal shock resistant from -60° C to + 90° C. Diffusers in transparent satin acrylic material.
Light body in powder coated aluminium. Opal plastic diffuser. Integrated led light source. Model AP Sensor equipped with PIR sensor. Available in anthracite or white finishes.
Aluminium light body finished with powder matt paint. Adjustable diffusers with transparent tempered glass.
Die-cast aluminium frame and turned finished with powder coatings. White plastic diffuser.
Light body in powder coated aluminium. Double diffuser, top and bottom, made of sandblasted transparent tempered glass.
Light body in die-cast aluminium finished with powder paint of anthracite or black colour. White PVC diffuser. ‘not recommended to expose direct contact with solar rays
Aluminium light body with natural brushed finish or varnish with various finishes. Transparent pirex glass diffuser.
Casting of painted aluminium. Positionable light body. Transparent pirex glass diffuser
Aluminium light body finished with powder matt paint. Transparent tempered glass diffuser.
Aluminium light body finished with powder matt paint. Transparent tempered glass diffuser.
IP:44
High performance resin light and diffuser: resistant to corrosion of both atmospheric agents and chemical fertilizers, colours stabilized by treatment U.V.,resistente 60° C to + 90° C. Directional diffuser.
Light body in die-cast aluminium finished with matt powder paint in white or black. Transparent tempered glass diffusers, one upper and one lower.
L 70 x H 110 x P 60 mm
LED 6W
30000 h
4000 K
800 lumen
IP:44
Surface installation device with powder-coated die-cast aluminium light body. Transparent tempered glass diffuser. Available in anthracite or white finishes.
L 13 x H 22.5 x P 3.5 cm
LED 6W
30000 h
3000 KG
500 lumen
IP:65
Light body in painted die-cast aluminium. Double diffuser, top and bottom, in transparent pirex glass.
Aluminium light body with natural brushed finish or varnish with various finishes. Transparent pirex glass diffuser. Light emission above and below
Light body in painted die-cast aluminium. Double diffuser, top and bottom, transparent pirex glass
IP:54
Light body in powder coated aluminium casting. Diffuser in opal plastic material. Available in anthracite, brown, white, grey and black finishes.
L 300 x H 70 x P 100 mm
LED 10W
25000 h
4000 K
1130 lumen
IP:44
High performance resin light and diffuser: resistant to corrosion both atmospheric agents and chemical fertilizers; colors stabilized by treatment U.V.. Thermal shock resistant from -60° C to + 90° C. Directional diffuser.
L 150 x H 120 x P 165 mm
GX53 max 1 x 10W
4000 K
IP:66
Light body in powder coated aluminium casting. Diffuser in opal plastic material. Available in anthracite, coffee, white, grey and black finishes
L 30 x H 7 x P 10 cm
LED 10W
25000 h
3000 KG
1020 lumen
IP:44
Light body in powder coated aluminium. Opal plastic diffuser. Integrated led light source. Model AP Sensor equipped with PIR sensor. Available in anthracite or white finishes.
Light body in powder coated aluminium. Adjustable diffuser with glossy opal polycarbonate screen. Available with dusk and motion sensor. Finishes: anthracite, white, coffee or black.
Light body in powder coated aluminium. Adjustable diffuser with glossy opal polycarbonate screen. Available with dusk and motion sensor. Finishes: anthracite, white, coffee or black.
Base and light body in powder coated aluminium. Glass diffusers. Indirect light emission. Finishes: anthracite, white, black.
Ø 180 x P 30 mm
LED 9W
30000 h
3000 KG
1050 lumen
IP54
Base and light body in powder coated aluminium. Glass diffusers. Indirect light emission. Finishes: anthracite, white, coffee, black.
Ø 240 x P 50 mm
LED 12W
30000 h
3000 KG
1400 lumen
IP54
Base and light body in powder coated aluminium. Glass diffusers. Indirect light emission. Finishes: anthracite, white, black.
Ø 300 x P 60 mm
LED 12W
30000 h
3000 KG
1850 lumen
IP54
Light body in powder coated aluminium casting. Internal structure that reflects the light beam both above and below. Available in anthracite, white or black finishes.
L 100 x H 100 x P 100 mm
LED 8.5W
30000 h
3000 KG
700 lumen
IP54
Light body in powder coated aluminium casting. Internal structure that reflects the light beam both above and below. Available in anthracite, white or black finishes.
Light body in powder coated aluminium. Opal plastic diffuser. Integrated led light source. Available in anthracite or white finishes.
Light body in powder coated aluminium. Opal plastic diffuser. Integrated led light source. Available in anthracite or white finishes.
101Apparecchio from installation on surface with light body in powder coated die-cast aluminium. Transparent tempered glass diffuser. Available in anthracite or white finishes.
L 22.5 x H 13 x P 3.5 cm
LED 6W
30000 h
3000 KG
600 lumen
P:65
.png "AR70DAY")
.png "Newsletter")
